Friday, May 4, 2012

Fibonacci quilt

Fibonacci Quilt
I made this quilt as a graduation gift. I wanted a throw size quilt. The kind you wrap around yourself on a cold day and read a good book or watch anything electronic. The finish size is 66" by 46 1/2."
I have been seen a lot of strip quilts on various Modern Quilt sites and was inspired to make one. I took my graphic paper and drew my pattern. Than back to Fibonacci for the dimensions. I used the sequence 4,8,12,20,32,52... for this quilt. I also used 2 as the "sashing" between strips. The seam allowance is 1/4" (1/4 inch), so I added 1/2" to all the dimensions.

Fabric requirement:
1 1/2 yards of central panel (light blue).
1 yard each of 2 other colors (medium and dark blues).
1 yard of  the blue border
2 yards of background (1/2 yard more for binding).
Batting : 76" by 56" This is a 80/20 cotton blend.

Cutting:
Light Blue: 1 piece 52 1/2 by 8 1/2 inches

Dark Blue: 2 pieces 32 1/2 by 4 1/2 inches
               
Medium Blue: 2 pieces 20 1/2 by 4 1/2 inches

Blue Border  2 pieces 54 1/2 by 2 1/2 inches
                    2 pieces 39 1/2 by 2 1/2 inches * I did piece these out of 6 strips of blue, so I did cut 6 strips that were 36 by 2 1/2 inches sew the short ends and cut the desired length for my borders out of this long strip.

Background:
For borders: 2 pieces 40 by 4 1/2 inches  **Cut these pieces first than cut the next pieces listed.

                    2 pieces 60 by 4 1/2 inches  ***Cut these pieces on the length of the fabric

6 pieces 55 by 2 1/2 inches  ***Cut these pieces on the length of the fabric.
4 pieces 18 by 4 1/2 inches
4 pieces 12 by 4 1/2 inches
2 pieces 8 1/2 by 2 1/2 inches

Sewing:
Sew the background pieces to the corresponding short sides of the "blues". Such as the 8 1/2" by 2 1/2" to the 52 1/2 " by 8 1/2." To make a piece that is 54 1/2" by 8 1/2". Than the shorter medium blue pieces to the longer background pieces and so on. The goal is for all to measure 54 1/2" in length.
Add the  background  55" by 2 1/2" strip to the pieces above (yes, I did cut it longer and trim at the end.)
I added one of the background strip to the right of each pieced blue strip and than the last one to the left of the one I chose to be the first from left to right. But that is just me. This work well if your fabric is directional.
Add the medium blue border starting with the side pieces (54 1/2"). Than the top and bottom borders.
Add the last border starting with the top and bottom borders (40" background pieces.); and the sides last.

I did piece the back with the leftover fabric. BUT I did add another fabric in the center. If  you know about Duke and UNC (University of North Carolina- Chapel Hill), you understand the central Duke panel (GO DUKE!).
If you want a pieced back with the leftover blues from the front, you will need 1 more fabric than listed above. About 15 by 42 inches should do.

Note: I do square off the top and back as I go; and also at the end. So the quilt will be square and easier to construct.
I have made blocks with more seams than this whole top. It was an easy and fast quilt to complete (2 afternoons).
The awesome quilting was done by Francine Blouin.
The photo was taken on my stair banister and thequilt was pinned to a hanger; but it is really nice and flat when it is on the bed. Just thought you needed to know that.
Hope you enjoy making this quilt as I did.
back

detail of the back

1 comment:

I'll do my best to answer all comments. Thank you

16 Patch Star

This block was made using all the fabrics available for a challenge. It is 12.5 inches unfinished. The small squares are cut at 2 inches ...